Logiq is now patented! This solidifies our position as a leader in the field of modern data engineering.   Know More

Deploying LOGIQ on MicroK8s using a Helm Chart

Deploying LOGIQ on MicroK8s using a Helm Chart

In a previous article, we showed you how to deploy your favourite application on MicroK8s using a Helm chart. In that article, we used the LOGIQ Helm chart as the example application we were deploying on MicroK8s. This article will take an in-depth look at how we deploy LOGIQ for our customers on MicroK8s, mapped to a custom domain and with HTTPS enabled. 

Our typical deployment of LOGIQ on MicroK8s includes the following steps. 

  • Installing MicroK8s
  • Enabling add-ons
  • Creating the logiq namespace
  • Assigning wildcard certificates and your custom domain
  • Installing LOGIQ on MicroK8s
  • Enabling and configuring ingress

Let’s begin.

Installing MicroK8s

We’re sure you already know, MicroK8s is a lightweight, pure-upstream Kubernetes aiming to reduce entry barriers for K8s and cloud-native application development. We love MicroK8s because of how quickly it lets us deploy a standalone Kubernetes cluster and install LOGIQ on it in literally under 2 minutes. 

The first step of our deployment is to install MicroK8s. To install MicroK8s, run the following commands.

sudo apt-get -y update
sudo snap install core
sudo snap install microk8s --classic
sudo usermod -a -G microk8s $USER
sudo chown -f -R $USER ~/.kube
sudo microk8s config > ~/.kube/config

You can check whether MicroK8s is up and running or not with the command:

sudo microk8s status

Enabling add-ons

The next step is to enable all the add-ons we need to support our LOGIQ installation. The add-ons we’ll enable are Helm 3, DNS, ingress, storage, and private registry. These add-ons are pre-configured to work without any additional configuration and can be enabled and disabled at will. 

Enable add-ons by running the following commands.

microk8s enable helm3
microk8s enable storage
microk8s enable dns
microk8s enable ingress
microk8s enable registry
microk8s.kubectl config view > $HOME/.kube/config

Create the logiq namespace

Next, we create the logiq namespace by running the following command.

microk8s kubectl create ns logiq

Assigning wildcard certificates and your custom domain

You can provide your wildcard certificates to the MicroK8s cluster using Kubernetes Secrets. If you choose to skip this step, the LOGIQ server automatically generates a CA certificate and a pair of client and server certificates for you to use. 

Create a secret file named logiq-certs.yaml using the following template. Ensure that you replace the placeholder text in this template with your Base64-encoded secret files.

apiVersion: v1
kind: Secret
  name: logiq-certs
type: Opaque
  ca.crt: {{ .Files.Get "certs/ca.crt.b64" }}
  syslog.crt: {{ .Files.Get "certs/syslog.crt.b64" }}
  syslog.key: {{ .Files.Get "certs/syslog.key.b64" }}

We can now install this secret file in the logiq namespace by running the following command.

microk8s kubectl create -f filename.yaml -n logiq

Installing LOGIQ on MicroK8s

Now we’re ready to install LOGIQ on the MicroK8s cluster we brought up. We first need to add the Helm repo since we’re using the logiq Helm chart to install LOGIQ on MicroK8s. Run the following command.

helm repo add logiq-repo https://logiqai.github.io/helm-charts

The following command installs LOGIQ and creates an S3 bucket for storing ingested logs using your AWS S3 credentials. Be sure to replace the placeholders in this command template with actual values.

helm install logiq --namespace logiq --set global.domain=<your-domain-name> \
--set ingress.tlsEnabled=true \
--set kubernetes-ingress.controller.defaultTLSSecret.enabled=true \
-- set global.chart.s3gateway=false \
--set global.environment.s3_bucket= <your-bucket-name> \
--set global.environment.awsServiceEndpoint=https://s3.us-east-1.amazonaws.com \
--set global.environment.s3_region=us-east-1 \
--set global.environment.AWS_ACCESS_KEY_ID=<your-aws-s3-access-key-id> \
--set global.environment.AWS_SECRET_ACCESS_KEY=<your-aws-s3-secret-access-key> \
--set kubernetes-ingress.controller.defaultTLSSecret.secret=<secret_name> \
--set global.persistence.storageClass=microk8s-hostpath logiq-repo/logiq

Enabling and configuring ingress

We’ve already enabled the ingress add-on for the MicroK8s cluster after we installed MicroK8s and brought up the cluster. The ingress add-on adds an NGINX ingress controller to your MicroK8s cluster. The ingress controller manages external access to the services in your MicroK8s cluster. 

An example where an Ingress controller sends all its traffic to one service.

We now have to configure the ingress controller and its ports using a DaemonSet spec file. Use the following daemonset.yaml file template and update the placeholders with actual values for your cluster.

Important: When using the following template, ensure that you point the default SSL to the secret file we created in the previous step.

Now that we’ve set up the ingress controller, let’s put together a ConfigMap to store configurations for all the objects used in our cluster. Use the following ConfigMap template. Be sure to replace the placeholders with actual values for your cluster.

apiVersion: v1
  "514": logiq/logiq-flash:514
  "24224": logiq/logiq-flash:24224
  "7514": logiq/logiq-flash:7514
  "20514": logiq/logiq-flash:20514
  "9998": logiq/logiq-flash:9998
  "9999": logiq/logiq-flash:9999
  "8081": logiq/logiq-flash:8081
  "24225": logiq/logiq-flash:24225
kind: ConfigMap
  name: nginx-ingress-tcp-microk8s-conf
  namespace: ingress
    kubectl.kubernetes.io/last-applied-configuration: |

Our LOGIQ deployment on MicroK8s is now ready to be accessed. Check the ingress controller on the logiq namespace to confirm whether the custom domain points to by running the following command.

root@logiqai-ami-1626692587-g-8vcpu-32gb-nyc3-01:~/flash-kubernetes/logiq# k get ingress -n logiq
NAME            CLASS    HOSTS               ADDRESS     PORTS     AGE
logiq-ingress   public   microk8s.logiq.ai   80, 443   63m

Your LOGIQ deployment can now be accessed over HTTPS at the custom domain you configured.

Accessing the LOGIQ on a MicroK8s cluster using a custom domain over HTTPS


As you can see with this deployment, it is very easy to deploy complex applications on MicroK8s using a Helm chart.

Sandesh Hegde

Sandesh Hegde

The LOGIQ blog

Let’s keep this a friendly and inclusive space: A few ground rules: be respectful, stay on topic, and no spam, please.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

More insights. More affordable. Less hassle.

Follow Us on LinkedIn
and Twitter!

Before you go, make sure you don’t miss out on our latest updates and insights. Follow us on LinkedIn to stay up-to-date on industry trends, company news, and valuable insights.

Click the “Follow” button below to join our community and stay ahead of the curve. Thank you for visiting our site, and we hope to connect with you soon!